How do you connect 2 speakers to one audio jack?
You could splice the wires but power reduction may be significant enough to where you would not hear them.
You plug it into either the 3.5 mm or RCA audio out jack on the computer and use the Audio Control Panel to set the output to external speakers. Read More
1) Look behind your CPU where you connect one set of the speakers. 2) Now plug in your another speaker set in the "audio in" jack, which is the blue in color. 3) Now open control panel > Sound speech and audio devices > Sound effect m manager. 4) Click on Speaker Configuration Tab. 5) Now under the first column "no. of speakers", select " 4 channel mode for 4 c channel output". Read More
How does one add a headphone analog audio out jack to a stereo TV which has only 2 tiny weak speakers and only a coaxial digital audio out orange RCA type jack?
You would have to purchase a Digital to Analog converter and connect the SPDIF (orange RCA connector) to the D/A converter's digital input via a RCA/SPDIF cable. Then you would have to connect some type of headphone amplifier to the line outputs of the D/A converter. Read More
Find your sound card (The card with 3 or more different headphone jacks), and install the cord from the speakers into the 3.5mm Green Jack, or the one labeled Speakers. Read More
If you have PC on the backside of the CPU there will be three holes in that middle one which will appear in green colour you can put the ouput pin into that jack. Read More
You can if you have a 3.5 mm jack lead, just connect the ends one with the device and other with your speaker and you are good to go. Read More
Yes it is possible, first you need a 3.5mm to rca jacks cable this will connect the audio from your laptop to the radio receive using one of the inputs from he back side If this is to be use in a car stereo , you will need to add an auxiliary audio input interface to your car radio Read More
Your speakers will probably have at least one of the following: 1) A slot like the one on your white iPod cord. If so, plug your iPod right into that. 2) A USB port. If so, connect your iPod using your cord. 3) A headphone jack. If so, you need a special cord with that kind of male headphone jack on BOTH ENDS of the cable (you can get this at RadioShack, etc). Plug one… Read More
By this I mean, I have 2 bluetooth speakers, and my iPod can only connect to one at a time. Is there a device I can buy that recieves the audio from the ipod, and transmits it to both speakers simultainiously, while keeping it mostly cord-free? Read More
I have the same model s you. To do so, there is a cable included in the box.(called a Y-Adapter) It will have a 3.5mm (likek a headphone jack) jack on one end, and 2 red and white jacks on the other. You then must connect the green 3.5mm jack to one end of the green wire (that would normally connect a computer to your sound system), and the other end of the green wire… Read More
Replacement audio speakers for a car can be bought at numerous locations. Good places to purchase them include car audio shops and car dealerships. Replacement speakers can also be purchased direct from manufacturers such as JVC, Pioneer, and Kicker. Read More
Basically, PC speakers and headphones usually have the same type of jack plug connector. If you've only got one sound output socket (and no headphone socket on the speakers themselves), you can just disconnect the speakers and connect the headphones instead. Read More
Yes as long as you use the same impedance. Preferably by using an impedance switch if available. Another example I found is as follows: When you run speakers in series - from one speaker to the next - you are adding their impedance's together, so if you connect two 4 ohm cabinets that way, you will have an 8 ohm load. Read More
Yes, in fact Microsoft sells a VGA cable for the Xbox 360, and there are also 3rd party VGA cables available for the xbox. You can connect the vga cable to your xbox and monitor but you also need a 3.5mm sterio jack left and right audio and a 3.5mm double female coupler which one end has the jack the other your speakers if you want sound. Read More
An audio summator is, in essence, the mixer. It takes various source inputs and "summs them up" into one audio output (to drive the speakers, for example). Read More
A computer can only handle one set of speakers at a time. Read More
An input is not an output. Some phones (like the iPhone) have a 4-conductor jack which incorporates a mono mic input. If you want to record in stereo with an iPhone, you can get one of a number of audio interfaces that connect to the 30-pin dock connector. Read More
Someone looking to purchase Fusion Car Speakers at Amazon or eBay. One might also purchase these speakers at car accessory retailers for sound and audio. Read More
How do you connect headset with two 3.5mm jack to one input 3.5mm jack I have laptop Lenovo G510 and there is only one input for headset sound and there is built-in microphone bad quality any help?
You cannot connect headset with a two 3.5mm jack with a one input 3.5mm jack. It is not made for a two jack connect. Read More
The Audio Jack, there will be two jacks on the laptop, one for an external microphone and one for headphones, the one of the right SHOULD be the headphone jack. Read More
Speakers are output devices, so you would not normally connect them to an input. If you did connect a speaker to an input, it would behave like a microphone, only very weak and very bassy. Read More
Computers normally have a 3.5mm jack socket as an audio output. Most stereo systems have phono (RCA) connectors for signal inputs. To connect a laptop to a stereo system you will need a 3.5mm jack to RCA lead. They can be purchased in most electronics stores or on line. Most audio systems have a selection of inputs. If there is a choice, you can use any input that is marked "aux", "line in", "CD", "DVD"… Read More
Assuming the source of the audio is an RCA female socket, (red and white colors) go to your local Radio Shack or other outlet and purchase Two (2) RCA,single male, double female "Y" cable adapters and Two (2) RCA stereo cables long enough for your needs. Connect each male adapter to your sound source and then connect the Red wire to one adapter and the White wire to the other adapter. Repeat this process with… Read More
Hi there are so many home speakers that provide very good audio. But klipsch speakers are one of my favorite and there is a company in USA that is branhamsound.com which is a great dealer of it. It provides best klipsch speakers at an affordable price. Read More
That depends. If they're computer speakers and all your wires are headphone-jack style, then all you do is run the headphone wire from your speakers and plug it into your computer speaker input on the sound card, or a headphone jack. If they're not computer speakers and you want to wire component speakers through your computer, you'll need a receiver to power them, speaker wire to go from your speakers to the receiver, and a… Read More
How do you add a headphone socket to the speaker wires so that the speakers disconnect when the headphones are plugged in?
== Each speaker is driven by a pair of wires coming from the amplifier. One wire is "live" and the other wire is "ground". There are two little contacts in the headphone socket which connect the amplifier's live outputs to the headphones when the headphone jack is inserted. When the headphone jack is removed the contacts reconnect the outputs to the speakers. So it's important to connect the "live" side of each of the speaker… Read More
Not with any great success ... but certainly no more successful than if one used normal audio speakers to amplify a guitar. The two are not interchangeable ... I mean, it will work kinda sorta but won't have the greatest tonal sound. Read More
One of the best places to buy Lanzar audio equipment would be at Best Buy. They sell the best of Lanzar's two and three way speakers, woofers, and amplifiers. Read More
XLR is a type of audio connector used in professional audio and video equipment. The three pin XLR is used universally for microphone and single channel audio signals. An XLR adapter is used to connect a professional audio signal to an alternative format. On a camcorder, it might be used to connect a low cost microphone or radio microphone receiver to the XLR input on the camera. One might be used on the audio output… Read More
Yes you sertainly can, bit I hope you mean your monitor (screen). Your computer cannot be a laptop and you must have a tv with a headphone output, and your monitor can have either an audio input that should look like a green circle and you should be able to fit head phones in, or two imputs (one red and one white, also the size of headphones). If it has the green circle, then either… Read More
26 inch vizeo tv that does not have outputs what do you need to buy so you can get surround sound for watching regular tv and playing xbox and watching DVD and stuff?
Surround sound system in a box is the cheapest option. Although the best one is going to be to buy separate speakers and connect them to a high quality A/V receiver. If you will be watching HD programming on anything then make sure you get one with HDMI ports. And for the best audio using optical audio cables are the way to go along with HDMI for video. Although for optical and HDMI you probably… Read More
Connect one end of the cable to the TV and the other end to the headphone jack on the computer. Read More
You should be able to get a cable that has a 3.5mm jack at one end, and the red & white audio connectors at the other. Plug the 3.5mm end into the sound output jack on your computer, and the red & white connectors into the corresponding connectors on your stereo. Put the stereo into auxiliary mode and you're done. Read More
Are Composite video 3-jack component video and S-video are types of connections one can use to connect a DVD player to a television?
In order of best performance: HDMI, 3-jack component, S-video and the poorest is the Composite. All but the HDMI will require audio cables to be connected. Read More
Amazon offers a wide variety of motorcycle speakers for different uses and needs, at affordable prices, with free shipping and high quality. An alternative would be 'Sharkmotorcycleaudio' who specializes in Motorcycle audio speakers and offers who accessories with it. Read More
If you are looking for physical speakers made by Dolby, then you are out of luck. They do not exist. Dolby does not make speakers, they make audio encoding, decoding, and processing technologies. Some products, like televisions and audio/video receivers, may contain one Dolby technology called "Dolby Virtual Speaker". Usually the logo can be seen on the front of the product. Read More
buy one, plug it into the headphone jack Read More
Take the rcas from the amp and connect it to the + and - posts on one of your speakers. Read More
The factory installed Monsoon system does not have one. but you can replace it with on that does. Read More
A switcher that will connect 2-3-4 other devices such as a camera, vcr etc. one at a time to a single audio/video input on the TV set. Read More
How do you get audio onto a tv from a computer when the video is connected via HDMI - is it possible to get the audio using a jack to rca adapter?
That is exactly right. There is a jack that looks like head phones on one side and the other side splits into left and right audio plugs. On the back of your tv there should be audio plugs that are associated to the hdmi plug. Plug in your audio here. Alternately you can plug your audio dirrectly into your stereo. Or go from your stereo, into your tv or vice versa. Read More
Researching the Macbook Pro has shown that the speakers port is available. One can use the headphones port located on the left front of the Macbook to connect speakers. Read More
there will be 2 wires one black and one red so jst connect them to your music system and enjoy listening to songs Read More
You would need a cable with a socket at one end - to connect your headphones, and two plugs at the other - to match the audio socket on each device. Read More
Yes, you can listen to an internet "radio" station on your stereo. If you do that, the audio might sound better than it does on your computer. You won't use the "AM/FM" part of your stereo, just the audio amplifier section. To do that, the stereo needs a jack (socket) somewhere on it that's labeled "LINE IN" or "AUX" or "INPUT". You need to get a cable to connect the audio from the computer to… Read More
You can listen to an internet "radio" station on your stereo. If you do that, the audio might sound better than it does on your computer. You won't use the "AM/FM" part of your stereo, just the audio amplifier section. To do that, the stereo needs a jack (socket) somewhere on it that's labeled "LINE IN" or "AUX" or "INPUT". You need to get a cable to connect the audio from the computer to the… Read More
Usually you wouldn't need to but if you wanted to offset it from balanced or if your connection has a stronger signal in one channel than the other you can connect a preamp or an amplifier with balance control and audio inputs as well as out puts to the system. You would connect the wires going in to the surround system into the input of the preamp and then connect the output of the preamp… Read More
When you say "wire 3 speakers" I assume you mean off of one output. If so, then I will tell you that there are two ways to wire 3 speakers. Series: In series wiring you connect the positive terminal of speaker one to the negative terminal of speaker two, then you take the positive terminal of speaker two and connect it to the negative terminal of speaker three. Now you can connect the positive terminal… Read More
In order to convert car audio system which plays CDs, the entire system has to be replaced with one that allows USB connection. It is not necessary to change all the wiring or the speakers. Read More
Doesn't have one. Only compact flash and ipod inputs. Read More