You don't. The units measure different things.
10.25hp
it cant someone in marketing is lying Regarding any electrical equipment, especially motors, 746 watts or volt-amps is 1 horsepower. If your table saw is rated 4 horsepower, that would be 2984 volt-amps and at 110 volts that calculates to 27 amps. The above answer is correct. At 110 volts you cannot run a 4 horsepower motor on a 15 amp circuit. <<>> The above theoretical answer is correct however you should allow extra for efficiency less than 100% and a power factor less than 1, so the current requirement should be increased by 25% to 34 amps. <<>>The rule of thumb for motors at 240 v is 7 amps per HP, which would be 28 amps for 4 HP, but because the voltage is less the current must be more, 28x240/110 which is 61 amps.
Amps are not directly convertible to horse power, which is a measure of power. Power is current times voltage. Therefore on a 240 v supply, 5.1 amps equals 1224 watts. One horse power is 746 watts.
The prefix 'micro' means, one millionth. So there are one million micro amps in one amp
Need to know the voltage and phase for this question.
1 horsepower = 746 watts, 1 watt = 1 volt x 1 amp => 20 Horsepower = 14,920 watts => 14,920 watts / 220 volts = 67.82 amps
How to convert horsepower to amps? You'd have to make an assumption about volts. If it's running at 220 volts, that would make it 34 Amps. There are 746 watts in a horsepower and Amps = Watts/Volts.
You are thinking watts to horsepower, not amps to horsepower. Please restate the question.
4.3 amps
Amps is amps be it DC or AC.
HP does not directly relate to cc
Please note that horsepower and amperes measure different things, so you can't just convert them directly. Convert the horsepower to watts. Then you can divide by the voltage used in your region - usually that's around 110 volts, or 220 volts, depending on the region - to get the amperes. This formula is correct for DC, and approximately correct for AC (in most common cases).
1 horsepower = 0.745699872 kilowatts you would convert it when you want a metric measurement for horsepower an example 400 horsepower(mechanical) = 298.2799 kilowatt
Watts are the product of amps x volts.
The relationship between horsepower (HP) and amps depends on several factors, including the voltage of the electrical system and the efficiency of the device or motor being measured. The relationship can be calculated using the formula: Power (in horsepower) = Voltage (in volts) xCurrent (in amps)/746 Where: Power is measured in horsepower (HP) Voltage is measured in volts (V) Current is measured in amperes (amps) The number 746 is a conversion factor used to convert watts (W) to horsepower (HP). So, if you know the voltage and current of an electrical device, you can use this formula to calculate the power in horsepower. Conversely, if you know the power in horsepower and the voltage, you can rearrange the formula to solve for the current in amps. It's important to note that this formula assumes a certain level of efficiency and power factor for the device being measured. In real-world applications, the actual relationship between horsepower and amps may vary based on factors such as motor efficiency, power factor, and other electrical characteristics.
one ton is equal to 4.71 horsepower.
Amps and volts are two separate parts of power measurement and do not convert into each other. Multiplying amps times volts will give you the measurement of wattage.