I HAVE JUST BEEN INSTALLING ENGIN ,WINDSHIELD AND A DRIVERS WINDOW. THE ONLY THING I CAN SAY YOU MUST PULL THE DOOR PANEL AND IF YOU DON"T HAVE A GOOD GIFT OF REMBERING THINGS I THINK YOU SHOULD MAKE NOTES WERE EVERTHING WAS TAKEN FROM . THE WINDOW GLASS MUST !!! COME OUT FROM OUTSIDE.; AS IT MUST GO IN FROM OUTSIDE. TAKE YOUR TIME AND DO NOT GET IN A RUSH;IT WILL GO FASTER .GOOD LUCK .
Trim Panel Retainers Clips hold the door trim in place on a 1999 Chevrolet Blazer.
http://www.thepartsbin.com/catalog/products.php?year=2000&make_text=Chevrolet&model_text=blazer&category=fuel_delivery&subcategory=fuel_pump Copy and paste this URL into your browser. They have several replacement models, many of which are for the 4-door. They aren't actually "on" a 2000 Chevy blazer 4 door, but they are "for" one. Dave
2 door or 4 door?
Under the vehicle, lift the plastic door right behind the front bumper; you will need a screwdriver.
there is no difference in wheel base
door latch diagram for 2000 Chevrolet silverado
It should be, yes.
If the door latch on a 1999 Chevrolet Blazer is broken on the car frame, a new latch might have to be welded in. The old door latch will have to be cut out with a torch. If the latch is broken on the door, a new door might be cheaper than welding in a new latch.
it refers to the single key for door and ignition.
The door shell has the same part number for 99 and 2000 Blazer and S10 pickup.
The 1998 Chevrolet Blazer door panel is held in place by eight retaining clips. Pry outward on each retaining clip to remove the door panel.
Look on the inside of your driver door it should say