Although there are 2 or 3 different version there is a link below that goes through the basic procedures which should be close to each one.
located in the distributor itself, follow wires coming from coil to distributor
1,3,4,2 Number one is at timing cover closest to the distributor.
you must remove the distributor, disassemble unit and replace pick up coil
If you are facing the distributor cap from the passenger side, starting at nearest to the front of the truck and going clockwise the sequence is 1-3-4-2. The timing check page below illustrates this.
I can help, but need a little more info. I need what type, or a description of distributor. If stock, what year the vehicle is. You can contract me through my message board for more help. 1992 madza b2200 truck.
Have the timing checked,it sounds like your timing is out,also check your distributor cap and rotor,good luck,Frank
No
The firing order on all 86-93 Mazda B2200s is 1-3-4-2 when facing the distributor from the driver side it turns clockwise. The terminal facing the front of the truck on the distributor cap is #1. Below are some related links that should help.
where is the fuel pump on a 89 Mazda b2200
Firing order for the b2200 is 1,3,4,2. And just for reference from the front pulley is 1,2,3,4,.Note buy a haynes or chiltons manual it shoes in picture format for each plug wire to the distributor cap exact.Spend the 16 bux it will be WORTH it.Advance auto,auto zone carry it on the shelf most of the time,if not they will order it for u.
where is the EGR valve on a 1989 mazda b2200
Who is a valve calibration for mazda b2200 1988