First: Check the owner's manual. If you're lucky, sometimes the dealer or former owner will have written down the code number somewhere in the manual (inside the front cover or on the page that describes the radio operation are favorite places). IF NOT: You will need to retrieve the radio serial number. On SOME radios you can do this by holding down both the number 1 and the number 6 buttons simultaneously as you turn on the radio. If you have one of those radios, the serial number will appear in the tuning window when you turn it on. IF NOT: You will need to loosen the radio and slide it far enough out of the dashboard in order to get the serial number off the plate that is affixed either on the back, or the bottom, of the radio case. When you have gotten the serial number - either call the Honda Customer Service 800 number, or stop by your local Honda dealer and give them the serial number and they should be able to give you the anti-theft security code for your radio. WRITE IT DOWN SOMEWHERE WHERE YOU WON"T FORGET IT! This will happen every time the battery is disconnected or goes dead.
You need to enter the code into the radio.
Honda radios have a security feature which prevents their use if they are stolen. This security feature is activated if the radio is disconnected from the battery (I.E. battery in car replaced). There should be a security code in your owners manual. Enter the correct code, and the radio will work. If you don't have the original owners manual, (or you can't find the information), you will have to go to a Honda dealer. They will have to verify ownership of the car/radio and can then look up the code.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3
The 2005 comes with a five digit (all numbers) code. After the battery is replaced, turn on the radio. The radio should show "Code." Simply punch in the five numbers on the turning buttons and the radio will immediately start working.
In your owners manual, there should be a radio code & how to enter it.
By inserting a 5 digit code into the radio by means of the station preset buttons. If you do not have the code then go to the Honda Owners Link and register your Honda. There you can get the code for free.
how to enter radio code honda fit
If you have already tried to enter a code many times, and it doesn't work, do the following: 1. Disconnect the battery, 2. Connect the battery, 3. Put Radio ON 4. Enter the radio code of 4 digits, 5. That's all. If you don't have the radio code of your Honda Odyssey, have on hand its VIN, and ask your former salesperson or your former dealer.
check your owmers manual for your radio there is a code you need to enter. You can find this at the back of the book. This usually happens when the battery is dead or replaced.
Enter the code with the preset buttons on the radio.
I assume you mean the radio code. If so, you enter it with the radio preset buttons.Call your Honda dealer because nobody seems to know how.
If you are asking about the radio unlock code you enter it with the radio preset buttons.