How do you find a hole in an above ground pool?

Answer 1

Depending on how much water you are losing there are a few ways first one is to let the water go down on its own until it stops dropping then your leak should be somewhere within 50-100mm of the waterlinesecondly if you empty the pool then get under the liner and move about the sun will shine through the hole then you can repair it never get under the liner on your own as you can become disorientated quite easily.

Answer 2

Look for a wet area around rhe perimeter of the pool. I you find one it give you a place to start looking inside the pool. Look for soft raised "smushy" areas on the floor and areas where the liner is separated from the wall. Closer examination of these areas may reveal holes in the liner. Good luck.

There are many ways to find and repair a pool liner leak - First you must find the leak using, visual clues, and common sense. Check these resources out for a great way of finding and repairing that leak!

www.swimmingpoolideas.com

Answer 3

My advice is to contact the manufacturer of the liner and get their advice. at least find out what type of glue works on the liner and if you can get a piece of it to cover the tear. I have always found that when you ask nicely company's can be very helpful.

Answer 4

you can tell if there's a hole in your above ground pool because all of your water will be pouring out of your pool and by morning, well..... lets just say you'll be saying, bye bye pool! :(

Answer 5

Use the website Findaleak.ca and follow the step by step process. It is a logical approach to eliminating areas of your pool which are not leaking via a series of easy tests.