code 22 needs (engine coolant temperature sensor replaced) don't know about the 25
Get a wiring diagram to find all that is on that fuse then look from there. Get one from MOTORLIT.COM.
Start with looking for a vacuum leak.
you stick some plastic explosives on it and run
The code P0 400, in your Chevrolet Geo tracker, is a reference to the ABS braking system not working properly. In most cases when the ABS braking system is not working properly you will need to change the sensor.
Check the bulbs - they are double filamented with the smaller being for the brake lights Check for a blown fuse Check the operation and alignment of the stoplight switch
You replace it you do not fix it.
where is the plug to conect the code reader on a 1990 Honda accord
You should not try to repair the fulty joint just replace the entire shaft , it will run you a few hundred dollars. ( 200- 400).
You don't fix it, you replace it.
Disconnect the ground cable from your battery, remove the bolts holding the old one on and then take the wires loose and put the new one in.
Look at the relay for the flashers, that should fix your problem.
kick it. that should help