A vortec 5.7 is a lt1 based engine.
Heater return pipe or hose, leaking intake manafold gasket.
From the factory, YES.
It is on the back bottom side of the oil pan. The oil pan is what bolts to the bottom of the engine.
1997 dodge ram 1500 2wd 1500 engine block heater location
no sorry they are cast iron.
Bottom , rightside of the engine I believe .
If it is a vortec engine, then there is no timing ajustment. It's controlled by the computer
They are pressed in.
mine gets 10. 97 2500 express
Try a search for vortec engines
NO. You need a VORTEC engine from the year 1997 to 1999
The ground strap on a 1997 Chevy Blazer 4.3 Vortec is located along the bottom of the engine near the frame. It ensures that electricity flows properly through the entire vehicle.
It has timing chain and gears. NO belt.
generally if an engine overheats, but then does not overheat when heater is turned on, is a good indication that the engine thermostat is stuck and needs replacing
15/50 summertime 10/40 winter
will 1995 Chevrolet 350 intake fit a 1997 vortec heads
vortec 454,1996 thru 1999-->>>290HP 410TQ
The 1997-2005 Vortec 5700 engines are EFI, as opposed to the earlier mid-80's and up 5.7 which were TBI.
It is right beside the thermostat housing, and that is where the top radiator hose hooks to the engine.
YES it is.
Behind / below the glove compartment area inside a plastic case . You can see where the heater hoses connect to the heater core at the firewall in the engine compartment