Flush the cooling system? Flush the fuel system? Flush the hydraulic brake system? Flush the AC system? Flush the transmission? Pick one.
MOISTURE IN YOUR BRAKE FLUID. FLUSH SYSTEM WITH NEW FLUID.
Drain and flush your entire cooling system.
when the brake fluid is dirty it should be a clear watery color it will be almost brown when its dirty
There is air or water in the brake lines. Flush and bleed the system.
It is not necessary to flush any system on a car. Brake fluid absorbs moisture from the air which in turn causes a corrosion to build in the system. That in turn will cause the cylinders to leak and not work properly.
Brake fluid can corrode your water pump. If you didn't start the engine after installing the brake fluid, then pump the reservoir empty, flush it with water and refill it with proper coolant. If you DID start it, you need to flush the whole cooling system.
Bad fluid in master cylinder,flush system,bleed brakes
By bleeding your brakes as you would normally. Just run enough brake fluid through to fill the reservoir 2 times.
most people never flush their brake fluid. manufacturers have service intervals anywhere from 2 to 5 years for brake fluid.
have a repair shop flush the system and refill with the proper fluid.
How can you flush benzos out of your system