With a straight screw driver. flip the round upper and lower cover, then use a small Phillips to remove the screws. Pry/lift the cover off, then lightly push in and turn the bulb counter clockwise
Brake light on 1994 Honda civic staying on.
To change the brake light bulb on a 1999 Honda Passport find the light housing located in the trunk. Find the plastic covers for the lights and remove them. Pull the bulbs out carefully and replace them.
The brake lights may not work on a 1993 Honda Prelude if the brake light switch is no longer working. The brake light switch is in the steering column just above where the brake pedal is bolted to it. There is also a chance that a brake light fuse is blown.
Brake light switch is stuck or out of adjustment.
check brake fluid
No, the license plate light is wired in with the rear tail lights, not the brake lights.
Defective or out of adjustment brake light switch.Defective or out of adjustment brake light switch.
You need to change the bulb. The filiment for the brake light part of the bulb is "open" or burned out. The filiment for the tail light portion will still work.
Brake light switch needs adjusting or replacement.
Adjust or replace the brake light switch.
Yes, it is the same fuse used for the rear brake lights.
It means one of your rear brake lights are out. Not the tailights but the brake light(s).