with the ignition off hold in the mileage reset button and turn on the ignition,when you have 4 dashes let go of the button ,then turn ignition off repeat this for service one ,and oil servise
CHECK
i dont now
with the ignition off press and hold the miles reset button in on dash now turn on ignition and start engine 'service now' should now be displayed now turn the clock adjuster button either left or right and this should rest the service noification.
When the car is off, hold the reset button on the right side of the dash (0.0). Then turn the key on (not the engine) and once the service now words come out on the display press the minute(m) button on the right. That should turn the service now off.
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
The Service Reminder Indicator (SRI) is fitted to all 2000 EuroVans It stores two sets of information: Oil Change and Inspection Service. Here is the method to manually reset the SRI after performing a service: Switch ignition OFF. Press and hold down the trip odometer reset button (at the lower right of the instrument cluster). Switch ignition ON and release the trip odometer reset button. It is not necessary to start the engine; merely turn the key until the ignition is ON. The trip mileage area now displays "Service OIL". If trip odometer reset button is now pressed again, the display turns to "Service INSP". Pressing the button again will cycle the display back to "Service OIL". When the reminder that needs to be reset (either OIL or INSP) is displayed, turn button for setting the clock (at lower left of instrument cluster) to the right. The display changes to "Service ----". That reminder is now reset. The second reminder is unaffected unless it is displayed by pressing trip odometer reset button and the clock button is turned right again. Switch ignition OFF and back ON to resume normal display.
It is an oil change reminder light. YOU make the call as to how long you want to continue driving with dirty oil. Now, this does not answer the question at all since the question was how long can you go w/ the wrench light. anyone else?
On your dashboard, click on the x on the bottom left hand corner. A line of widgets you have will show up on the bottom. Find the clock widget, and click it once. Now click it again. You now have 2 clocks on your dashboard.
Hold in reset button on speedo, turn on ign then release button,then turn it to the right and release it then switch off ign. This will only work if service is due now or showing nearly due
I know it in the dashboard. I think all Chrysler have it in the dashboard now
no if it was a reminder of 0 then there is nothing left over so there is no point on putting REMINDER 0 now is there :P its like as if you were saying that the numbers from 1-5 were: 1.0 2.0 3.0 4.0 5.0 it doesnt make a difference if you put the .zero or not, its the saaaaaaaame
the answer is 25. now that you got the answer, go bang yourself 25 times