Want this question answered?
Anyone know is it possible to use the backseat as the third row ? Do they pull out and attach the same (specifically in a 1998 ford expedition xlt )
My back bench needs only pull forward on the seat as you push the back of the seat down toward the back down, results in flat out bed.
sounds like the blend door is not working
No the explorer is just an average 5 seat suv the expedition however does
You need to pull the tab at the back of the flat part of the seat up before the back of the seat will go down. It is best to remove the head rests to get them to lay flat. Also, be mindful to secure all the seat belts and ESPECIALLY the pull tab strap in the correct position when you are replacing the flat part of the seat or they are difficult to use once the seat locks back into position. The little strap on the back of the cushion bottom is not what you need to pull. There is another black strap (in the same area but often pushed into the seat crack) that needs to be pulled. It controls a latch that releases the seat and allows you to pull it up.
Yes, you can hook up a car seat to the Ford Expedition
i have a 2000 expedition and all you have to do is open the back hatch door, then fold the seat down, and finally grab the bar in the middle of the seat and push forward and pull up and it wlli be unlocked to pull right out..
Yes, the back seats of the Hyundai Santa Fe can be folded down flat. In order to have the seats lay completely flat, it is recommended that you remove the head rests.
It should be under the passenger side back seat as a kit.
You may have to pull seat off vehicle to be able to see what the problem is. It maybe broken wires if so you may have to solder it back in place.
can a ford expedition be flat towed?
its manual adjust forward/back is the lever under the seat front, recline is the lever on the right "side", to fold it down flat is the handle on the back