Sometimes the latch on mine sticks on the drivers side, i usually push the seat back with my other hand to relieve the pressure on the latch. I then pull up on the handle and the latch will release all the way and allow the seat to come forward.
You didn't say what year you have but, the cable has an adjustment at the transmission end. You need to release the adjustment lock, adjust cable then reset lock.
The 1997 Chevy Blazer shifter cable will have swivel nuts on each end of the cable. Connect the shifter cable and turn the swivel nuts to the right to install the shifter cable.
I believe that the first digital cluster on a S-10 Blazer was in 1989.
disconnect your neg batt cable
Broken cable?
The 1996 Chevrolet Blazer shifting cable will have a retaining nut on each end of the cable. Loosen the retaining nuts. Remove the cable routing retainers. Reverse the process to install the new cable.
About 30 min.
Replace it with a new one, there is no repairing it.
It is attached to the starter. The positive battery cable runs directly to it.
Neither, I believe it's electric.
usually on the rear lower end of engine--follow + battery cable
Disconnect the negative battery cable from the battery.