There could be screws around the edges of the door and there should be some under the plastic panels like where the door handle is. You will most likely need a small flat blade screwdriver to get under the plastic covers to where the screws are. I have never worked on an Expedition but had a Ford car for 5 years and took the interior apart several times without breaking anything. After removing all screws the door panel should lift off of the door when you pull with an upward/outward motion. Good luck!
Take off all the screws on the door panel.
You don't without breaking the door panel.
How to take the door panel off a 2002 mercury mountaineer?
Removing a door panel from a 1995 Ford Contour is very easy to do. You will need to take the speaker casing off by taking out the two screws. Then you will need to take the clips off that are holding the door panel in place. There will also be two retaining screws to be taken off the door panel with a Phillips screwdriver. After all the screws and clips are off, the door panel can be lifted off.
how do you take the door panel off on the driver side
take the panel off the door, everything is inside
To remove a door panel from a Renault Clio all the mounting screws need to come off. After all screws have been removed the door panel can be pulled off.
Using a screw driver, remove the screws and remove the clips from the door panel. Remove the panel slowly, remove any wire connections, and pull the panel off the door frame.
To remove the driver side door panel on a 1992 300E all the mounting screw must be taken off. With the screw off, the remaining clips which hold the door panel need to be gently pried off. After all the hardware is removed the panel can be pulled off the door.
Removing a door panel from a 1995 Ford Escort wagon is very simple to do. The clips that are holding the door panel in place need to be removed, then the screws in the door will need to be taken off. After the clips and screws are removed, the door panel can be lifted off.
First, using a screw driver, remove all the screws from the door panel, and unclip all the clips in the door. Next, Pull the panel gently, remove any wire connectors, and pull the panel the rest of the way off.
Take the whole door panel off. The grill will come with the door panel.