Its simple, you need to locate a tool just for window cranks, usually found at an auto parts store, or ordered through a tool dealer. if you live hear a BestBuy or similar store that installs audio, simply tell them that you are having trouble and ask them if they can pop them off for you. i did that and it took literall 10seconds max for each handle! (if you want the tool, snap-on works like a charm... but has the price of one as well) it depends on how the crank is held on. if it is a little spring type piece of metal i have been able to remove them quite easily with a little hooked piece of mechanics wire. if not than you probably need to buy the tool but i think they are around 10 or 15 dollars.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
There is u- shaped flat peice of meltal and it's a window handle clip remover Auyo zone has thewm and they do now cost much! Good Luck!
Take off your door panel and there is four bolts i believe remove them and it come s off pretty easy.
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
All you need is a paint can opener. Under the window crank there is a horseshoe shaped pin and you just need to snag it and pull it out. Put down the window first and do the above. Then after romoving all the screws in the door panel lift up on it until it pops off.
there is about 7 screws in the front door and u have to take the pin out for the window crank unless its power windows there s screw where the handle is and where u open the door on the inside
Trust me there is a clip it is a real cheap wire horseshoe shaped clip, the only way to remove this clip is you need to purchase a tool just for removing clips on window cranks.
You need to remove the window hand crank with a window hand crank removal tool.
there is a special tool to do this they should haze one at your local auto parts store and shouldn't be more that a few bucks there is a little clip ring behind the window crank.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
It requires a special tool available at the parts store cheap. Use 2 Screwdrivers, force a rag between the door and the window crank handle to give you some space, then pry the clip apart or take a small hook, hook under the loop of the pin and pull up.
you have to remove window crank and door handel first