1. Behind each light you will see a small door in the back liner. Remove the 2 plugs in each door by pulling them straight out. 2. Gently pull back liner doors to expose rear of light assembly. 3. Remove three brass 10mm nuts from exposed bolts. 4. Slightly lift up bottom inside corner of light assembly, Pull back or sideways to center of bumper or trunk rear with wiggle movement to pull out rear light assembly. Takes a little while, but piece of cake.
Not to be unkind - but READ THE MANUAL.
how do you change a brake light bulb from a citroen c4 tail light unit. thanks
how do i change a parking light bulb on a 2003 hyunadi accent
Waht is location of BMW x5 brake light bulb to change?
a 2003 Chevy silverado taillight bulb uses a 3157
The brake light bald can be accessed through the trunk of the car. Remove the rear tail light cover to access the brake light bulb.
2003 Nissan Frontier brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Unscrew the housing from the sheet metal and remove the bulb socket from the back of the lens housing. Replace the bulb and re-attach.
Look in the trunk, there is cover for the brake light, remove and you will have access to change the bulb.
how do you change the brake light bulb on a Peugeot 3008 Halfords cant figure out how to get access
You have to take the whole light out, there is two screws to take out, then the light will pull out. Then change the bulb. Greeny
Just unscrew the rear brake light, turn out the socket, and replace the bulb.