Purchase an inexpensive set of quick-disconnect tools from your local auto parts store.
The heater blower motor on a 1999 Subaru Impreza is in the engine compartment on the passenger side of the vehicle. It is located on the firewall.
On the rider side firewall in the engine compartment ?
Instualation of a heater core on a 1999 Ford Explorer V6, how do you install the heater core.
Its a Durango.......not a Drango.
heater core is in back of the glove box
You have to completely remove the dash to get access to the heater core.
To change the heater core on a 1999 Chevy 4-wheel drive, first remove the dashboard and drain the coolant. Unbolt the core from its mounts and remove the dash panel to be able to change the heater core.
The heater core is located behind the dash inside the heater core box with two ports, an inlet and an outlet port protruding through the firewall into the engine compartment.
You have to remove the entire dash board to gain access to the heater core.
this may not be a project you want too tackle yourself. your heater core is located in the heater box which is located under the dash. to removeyou will need to drain antifreeze remove heater hoses(2) located on the firewall in the engine compartment.remove the dashboard to access the heater box.remove cover for heater core .replce and install everything in reverse order.this is a 4 or 5 hour job for a mechanic.
Bad hose or clamp where the heater core is connected would be the most likely problem.
Underneath the dash on the passenger side. Open the hood and you will see the hoses entering the firewall where the core is located.