0
How do you hook the wire to the aftermarket alarm back up if it was cut when the ignition switch was replaced by Honda on your 1999 Honda Accord?
Wiki User
∙ 16y ago
The "best" thing to do would be to take the vehcile back to where the alarm was installed. Honda wont touch aftermarket problems. If the alarm was installed by a previous owner, than try looking up a local electronics store (alarms, stereos etc). they will be able to fix it for you, without giving you a headache.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you change ignition switch on a 93 Honda Accord?
how to change manual ignition switch on a 93 Honda accord
Do you need to remove the ignition lock to replace the ignition switch on a 94 Honda Accord LX?
no the switch can be independly remove from the back side of the ignition lock
Can the ignition switch on an 82 Yamaha XS650 be replaced with any universal ignition switch?
I would say no. Wiring is different for different models, makes and years. If you don't want an ignition switch from the manufacturer, you can purchase an aftermarket one for your bike All the dealers need is the year, make and model of the bike. mine runs the ignition switch from a 250 honda, as long as you take care to match up the positive feeds to the correct switch positions then no problem
Where is the valet switch on a 2001 Honda Accord?
I dont think a valet switch was standard on the accord but for most all aftermarket alarm installs the normal place for the valet switch is under the dashboard by where your left knee would be.
1991 Honda Accord engine cuts out while driving?
Ignition switch
Changing ignition switch in 2002 pt cruiser I was told you can not change out the switch but had to put in a whole new steering column costing 1200.00. I think this is BS any answers?
Ign. switch can be replaced. Remove steering column covers, switch is located on left side of column. The above is correct, but you will have to have the tumblers from your old ignition switch transferred to the new assembly IF they are not worn out. Do do the smart thing purchase the OEM as the aftermarket switch is a tad bit less pricey than the OEM, but why take a chance on an aftermarket item! NO, I do not work for a Chrysler/Dodge dealer!
How do you turn on the Honda Accord?
Turn the ignition switch clockwise until it starts, then release.
Where can i get an online Harley-Davidson Motorcycle wiring diagram?
wiring on aftermarket dash mounted ignition switch
I have a 1997 Ford Aspire that I replaced the ignition switch. I now dont have any fire to the ignition. Is there a problem with the ignition module or the ECM?
are all the connection plug in on the switch and did you have fire before replaceing switch
1991 Honda Accord LX Replaced the battery alternator and main relay Turn the ignition switch the power comes on however try to crank the engine the power goes dead The power then re setts fuses good?
engine seized, starter not working, ignition switch,chek fuses ALL!
1989 Honda accord 20 l Start then dies immediately It has fuel to filter and to the fuel rail and to regulator?
I had a similar problem on a Ford truck and it turned out to be the ignition switch. The truck would start just fine but when I released the ignition key the truck would die. I replaced the switch and problem was gone.
How do you remove the ignition switch of a 97 Suburban?
you can take it to be replaced it has a recall on them
