Want this question answered?
belt
If you can get to the starter, you hook up one side of the switch to the terminal that goes to the battery and the other side of the switch to the small terminal marked with and "S". "S" is for starter. The other small terminal you leave alone. Applying power to this terminal will damage the starter.
If you are sitting in the steering wheel the hook up will be located by your right knee under the dash.
All-remote starts come with instruction. Each one is different. Follow the instructions check twice before cutting or splicing any wires.
Using the starter solenoid jump the small middle terminal with the starter terminal at the rear of the solenoid
In the wiring harness behind the parking brake. You will have to remove the plastic shield and dig around in the wires for it. Pink with White or white with pink. Can't remember. Consult your remote starter manual.
underneath the car. somewhere near where the engine and transmission hook up.
Lexus has to hook their computer to it to program the key to both lock/unlock and to start the vehicle.
It is on the top of the starter. The solanoid is what the starter wires hook to.
You can hook up the starter, on your 1984 Chevrolet, by attaching the ground cable and the hot cable to the appropriate posts on the starter. Bolt the starter into place.
how to un hook
Where to hook code reader 2002 envoy