Do not purchase a universal harness. Purchase an OEM type trailer harness for your ride and it will fit perfectly and be basically a plug in type. It will cost more but is worth it. The instructions that come with it will describe in detail the installation. The 2002 - 2005's are the same. hitches4less sells the OEM wiring harness. It is basically a plug-and-play installation. Unlike other harnesses, however, the liberty also has a ground wire and a "hot" wire from the converter. After plugging the harness into the exiting plugs, you have to ground the converter, and then run a hot wire (with an inline fuse) to the battery. This hot wire, as per mfgr. provide power to the trailer lights.
where do i find the wire hook up by the trailer hitch?
You need to buy an adapter harness. Do not cut into your wiring harness.
It should be by or under the rear of the vehicle.
I'm not certain that the vehicle came factory-equipped with a trailer wiring harness. HOWEVER - if it does exist look CAREFULLY underneath the rear of the CR-V for the wiring to be tucked up and into the rear area somewhere, perhaps underneath the rear bumper housing.
it's at the rear behind the left side cover. once the cover is pull you should see a plug in. You may have to go to the dealer to get the proper wiring harness.
Need more info. harness wiring for what?
I imagine a 2002 would have similar wiring to a 2000 Explorer which I've just discovered myself has 2 fuses dedicated to the factory installed trailer wiring. Fuse #3 is for the left trailer signals and fuse #7 is for the right. Hope this helps someone to avoid all the hassle I went through to figure this out.
At a recycling yard.
Check the fuses for the trailer wiring.
No.....They look the same but they are not the same. The wires have been put in different places.
vf cd4dikjmnym e;r'nfrhvctc
Check the wiring harness for the motor to the sunroof. The harness may be loose and might need adjustment. My sunroof on my 2002 Liberty Limited stopped working and I dropped the headliner and found that there was loose wire. I clicked it back inot place, and it works just fine.
call the dealer