go to autozone or some other parts store and ask them for the connector to hook up your lights under the driver side towards the back there is a connector pull that apart and put the piece you just bought in the middle it is very easy and will make sense once you see in go to autozone or some other parts store and ask them for the connector to hook up your lights under the driver side towards the back there is a connector pull that apart and put the piece you just bought in the middle it is very easy and will make sense once you see in
U-Haul sells a kit with instructions
test
Try Here: http://www.suspensionconnection.com/cgi-bin/suscon/7208.html. Instructions come with the kit.
Auto parts stores can sell you a trailer harness that plugs in between your existing truck harness. The electrical connection used is usually located behind the rear bumper on the inside of the left frame. Directions will come with the trailer harness kit.
The bulbs on trailer look good.Lights on truck work.Might be ground not sure.Looks ok.
it is under the hood on the driver side in the fuse box
You can find a wiring diagram that shows you how to hook up a trailer wiring harness on a 1998 Pontiac Transport at most auto parts stores. A Pontiac repair manual should have the diagram in it.
The fuse box for the fuel gauge on 1998 Chevy blazer is located on the driver side. It is near the hook latch.
The center pin of a seven blade trailer plug is for reverse lights, not power. What type of truck is it? What trailer plug do you have...
The fuel gauge fuse on 1998 Chevy blazer is located in the front of the blazer. It is on the driver side next to the hook latch.
form_title- Car Trailer Rental form_header= Hook a trailer to your car. When do you need the trailer?*= _ [50] What size trailer do you need?*= {Small, Medium, Large} Do you have the equipment to hook the trailer?*= () Yes () No
Most auto parts stores have wiring kits that you can just plug into your factory wiring without any trouble. Check with your local auto parts dealers