To diagnose a noisy pulley, remove the serpentine belt and turn all pulley's by hand. Try to notice which of the pulleys make a grinding sound or feels loose. Even an alternator bearing can sound like just another bad pulley bearing, so don't assume that the alternator is okay.
A bad bearing often feels like there are little grains of sand inside when you turn it manually, but sometimes it's difficult to detect the problem if you haven't had the experience.
Note, before you remove the serpentine belt, make certain that you have some kind of drawing or a good mental image of the routing so that you can put it back.
Replace tentioner pully on 2.8 multiport
go to youtube and type in ericthecarguy and change pulley
if it is anything like my 97' Saturn Sl2. The engine must be dropped out to dismount the transmission.
That is the water pump pulley.
The water pump on a 97 Nissan Sentra is behind the timing belt. To replace it you will need to drain the coolant, remove the cylinder head, loosen pulley bolts, drive belts, and water pump pulley. Next, remove coolant hoses, water pump bolts, and finally the old water pump. Reverse directions to replace with new pump.
That would be the crankshaft pulley.
procedure on how to bleed air out of coolant system on 97 saturn ls
you should be able to put a socket wrench in the front of the idler pulley. Push away from the tension of the belt, then remove the belt. MAKE SURE you remember how the belt came off. Loosen the bolts on the pulley, then remove. Install new pulley, then put the belt back on.
How do you replace an alternor on a 97 pathfinder
I do not have a 93. I have a 97...
I just replaced the radiator in my 97 SL2 today. What exactly are you asking? Step by step instructions?
is it a pintara