Install a water hammer arrestor (air chamber)
vertically
no, you need a hammer arrestor.
The best concrete anchor for households is hammer-in-anchors. Hammer-in-anchors are easy to install and don't require separate screws, but cannot be used on crumbly surfaces.
30gal.hot water tank cost+installation
Install a water hammer arrestor (air chamber)
install an air hammer arrester. Any plumber can install it in a few minutes. Also make sure your water pressure isn't to high
vertically
Install hammer arrestors at the highest point of the water lines.
you can find water hammer In plumbing that is not fastened properly. Water hammer is not an "It" Its the sound made when water is turned off suddenly and the loosely fastened pipes make a banging sound.
Water hammer is caused by inadequate strapping or restraining of water lines or excessive pressure. Install a water hammer arrestor at the fixture and strap the lines more securely.
If possible, install hammer arrestors in hot and cold water mains.
Install anti-hammer arrestor in hot water line at tub. It should help.
You need to install a Water Hammer Arrestor. You can purchase types that attach to the supply connection of the fixture that is having the problem. Usually these can be installed by inexperienced home owners. Check your local Home Improvement Store or Hardware store. Also the sales associate should be able to show you how to install them.
No. Installing an anti-hammer arrestor in water line will take care of water hammer.
It might mean that there is air in the line. Maybe install a water hammer.
Who told you you have a bad "water seal"? Are they referring to the plugs in the side of the engine block? If so, knock the out with a hammer and screwdriver. Use install tool to reseat the new ones. If they are referring to a water pump, it is just unbolt old, clean connection, install new.