answersLogoWhite

0


Best Answer

first you need to measure the surface area of your rad. then got to your local parts place and tell them you need an aftermartet electric fan kit (with your predetermined fan size and the kit will have detailed instructions for installation

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install an electric fan on an 88 305 in a K1500 pickup?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the pressure rating and rpms for power steering on a 1989 Chevy k1500 pickup 305?

1350-1450 @800rpms


Can you use a 1994 700r transmission out of 6 cylinder truck and install it in a 1990 or 1992 305 V8 truck?

yes, the 700R4 transmission is the standard trans for the K1500 with a 5.7 350 engine. 305 is also with the 700R4 transmision.


What is the fuel pressure for a 1996 Chevy k1500 pickup with a 305 engine?

hi there. i just did mine, and it has to be 14 to 16 pounds on line. on plug your line to the carb and put the meter on there and see. cheers!


How do you change a camshaft in a 1989 Chevy k1500 with a 305?

very carefully


What is the horsepower of a 1988 k1500 with 305 engine?

200hp and 260 torque


Will a Chevy transmission from a 1996 k1500 with a 305 V8 fit a 1996 k1500 with a 350 V8 engine?

YES, That is a direct swop.


What transmission is in a 1998 Chevrolet k1500?

4L60E in 5.0 or 305 cu in 4x4


What will cause a 88 Chevy 305 in a K1500 pickup to sometimes have trouble starting or will start and stall replaced spark plugs and checked wires problem occurs in warm and cold weather?

Try changing the oxygen sensor.


Where can you buy a supercharger for a 1997 Chevy Cheyenne K1500 5.0 305 Vortech engine.?

http://www.jegs.com


Where can you buy a supercharger for a 1997 Chevy Cheyenne K1500 5.0 305 Vortech engine?

http://www.jegs.com


How do you install an oilpump on a 1989 Chevy 305?

Take the oil pan off and remove the bolt that holds the pump to the thrust bearing cap. Install the new pickup on the new pump and verify the pickup location. It's a good idea to tack weld the pickup to the pump in a couple places. Install the pump driveshaft to the pump with a new connector. Install the new pump being careful to align the drive shaft with the distributor. Sometimes you have to turn the driveshaft and put it up in there a couple times until you get them lined up.


What is the horsepower of a 1986 Chevy pickup with a 305 motor?

the 1986 Chevy truck 305 HO produced 180 hp