Remove wheel
Remove caliper mounting bolts
Slide caliper off rotor
Use a "C" clamp to full retract piston into caliper body
Replace inner and outer pads
Re-install caliper
PUMP BRAKE PEDAL TO SET PADS AGAINST ROTOR PRIOR TO MOVING VEHICLE
The minimum thickness for rotors on a Dodge truck is between 0.5 and 1 inch. It varies greatly based on the model and whether it is the front or rear brakes.
It could be that the rear brakes are not functioning properly; leading to the front brakes having to compensate. That is, if the front ones are going out much quicker than the rear. I believe that the front ones just naturally wear faster than the rear ones On a light truck the front brakes will do up to 75% of the braking.
call your local auto parts store.the cheapest pads for my truck are about $25 for the front set.
There will be a wire running to a sensor at the front wheel bearings on both sides. No wire to the bearing, no front abs.
Does the truck have stock discs? Why would you want to switch the discs back to drums? Does the truck have stock discs? Why would you want to switch the discs back to drums?
How do I install a aftermarket tachometer on a 1995 dodge ram truck
changing front brake pads on 1991 Toyota truck
fordparts.com shows disc brakes on the front of a 1988 Ford Ranger
It just means that your truck needs to be realigned. The left brake caliper or left front brake hose is seized/restricted and needs replaced.
Tell me the year and I can tell you the answer.
front brakes leak fluld on1977 f700 dump truck
Air brakes are located in the front of a truck or trailer. There are many parts to an air brake. If you suspect a problem, you need to take your truck to get fixed.