0
Ok, so the first thing to do is remove the one heater core box bolt that is under the dash on the passanger side behind the carpet and cut the two black taps with a dremmal on eithe sided of that bolt. Next remove all the undash plastic, glove box, front dash cover and insterment cluster. Next on the driversside there are two 90deg angel brackets under the stearing colum remove them (4 screws) also there are two screws on the lower part of the dash one one each side near the floor next to the door that need to be removed. After that you need to remove the speaker covers and the defrost vent cover to access the screws that will lossen the dash I think there are 6 screws. Once they are removed the dash will roll back. You need to disconnect all the wire harneses that are connecting the dash to the fire wall so the dash can be pulled out farther. (I found that tilting the dash just did not work there was not enough room to work.)
Ok time to remove the heater core in the engine compartment there are two bolts and one nut. The nut is right next to the hoses that go to the heater core. One bolt is just to the left of the distributor below the heater core supply hoses. the other bolt is the hardest bolt to get to it is in the A/C evaporatior box where it says cut here for service so get in there and lossen that bolt and the heater box comes right out on top of the hater box there are two screws that are holding a cover over the hater core remove them and that is the core. To reassemble just do it all again backwards. Type your answer here...
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you install a heater core for a 1995 Audi a6?
How do you remove a heater core on a 1995 Audi A6?
Where is the heater core on a 1995 Chevrolet Blazer 4x4?
The heater core is inside the heater unit on the passenger side under the dashboard
How do you replace a heater core in a 1994 Chevy Blazer S10 with AC?
Drain the water from your 1994 Chevrolet Blazer cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
How do you bypass the Heater Core in 1995 Chevy Blazer?
Just unhook the hoses from the heater core and put a tube are something in the middle of them and clamp them together.
Replace heater core in 1997 Chevy blazer?
how to replace a heater core in a 1997 Chevy blazer
How do you replace a heater core in a 2001 Chevrolet Blazer?
how do i replace a heater core in a 2001 Chevrolet blazer
How do you remove the heater core from a 1995 Mazda 626 1 liter engine?
You will need to drain the anti-freeze from your 1995 Mazda 626 cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Do you need to remove the dash in a 1995 Chevy silverado to install a new heater core?
Nope.
How do you change the heater core on a 1999 Chevy Blazer?
You have to completely remove the dash to get access to the heater core.
How do you install a heater core on a 1989 Buick lesabre?
How do you install a heater core on a 1998 buick lesabre
How do you install a heater core on a 1995 Chevrolet Corsica?
Big job==TAke it to a garage or get a manual and do it right
How do you change a heater core on a 1999 Blazer?
You have to remove the entire dash board to gain access to the heater core.
