I have found that by removing the headlight assembly in the front, you can change the bulbs on the front. If you open the trunk, and remove the gray insulated cover, that covers the tail lights, you can change each bulb individualy.
have you check all the bulbs? if one of the bulbs are bad they will light up, but will not blink.
Answer You might want to check your flasher relay which is under the dash.
Check the bulbs first but it can also be the flasher.
Check the bulbs they are double filamented with the smaller for stop and turn signals
Caheck the bulbs or the multi-function lever
Check the fuse, check the flasher relay and check the bulbs. It's probably one of the three.
are you asking about the turn signal bulbs , the turn signal switch or turn signal flasher ?
Check bulbs could be bad switch in steering column
I have found that moisture can cause that problem you may also want to check your fuse and bulbs if you see moisture try to get it as dry as possible
bad bulbs
It could be the turn signal bulbs, some vehicles use separate bulbs for the hazard and turn signals. It could also be a bad switch or wires for the turn signals.
Check fuse,bulbs, flasher