0
What else can I help you with?
What direction do you need to turn the crank shaft bolt to loosen it and remove the pulley on a 740 Volvo 1991?
LEFT! Surprisingly the bolt is a normal right-handed thread
Why does the starter jack shaft bolt loosen when trying to start on a 1992 softail?
The bolt shaft is threader at the wrong hand
Will the engine turn over by the crank shaft bolt if it is seized?
No
What would cause a crank seal to leak on a 1990 Mitsubishi montero ls 3.0 liter v6 engine?
AnswerCheck the crank pully bolt. If it has come loose you will have a leak.The crank pully bolt does not have anything to do with the crank shaft seal leak. Thebolt is independent of the seal. To replace seal remove crank shaft pully and you will have access to crank shaft seal, pull out & replace seal.
Is crank bolt threaded left handed on a 1989 Ford Festiva?
The Crank bolt on a 1989 festiva is just a standard thread. Right to tighten left to loosen. nice and simple. The Crank bolt on a 1989 festiva is just a standard thread. Right to tighten left to loosen. nice and simple.
Which direction do you loosen a Honda civic crank pulley bolt?
Counterclockwise. Skweekah
How do you hold crank while trying to remove crank bolt?
use impact gun or use the the starter to loosen the bolt with a long Johnson bar or ratchet.
Where is the crank shaft position sensor located on a 2000 Mitsubishi Eclipse?
behind the crank shaft pully and the timing cover and then another pully is there two bolt hold it on
Remove crank shaft bolt Ford Escort?
you get a gun and you shot it till its removed
What is the torque specs for a chevy 305 crank shaft bolt?
70 ft lbs
How do you remove a stuck distributor rotor from a 1989 2.5L LeBaron?
The Rotor has a small bolt that holds the Rotor on the shaft. Did you Loosen this bolt?
How do you loosen bolt to remove crank pulley?
To loosen a bolt for removing the crank pulley, first ensure the vehicle is in gear or the parking brake is engaged to prevent the crankshaft from rotating. Use a socket wrench with the appropriate size socket, and if necessary, apply penetrating oil to the bolt to help with rust. If the bolt is particularly stubborn, you can tap the wrench with a hammer or use a breaker bar for added leverage. Remember to turn the bolt counterclockwise to loosen it.
