I would use water based lubricant like the one used with condoms.
Easy to find, environmental friendly, put apart the obvious sex use, otherwise its the best known substance to lubricate rubber and other synthetic materials.
Silicone adhesive.
Silicone is not a product of petro-chemistry.
Use 100% silicone adhesive like PL700.
You might want to try a product called Zinnzer Bullseye 123. It's a latex primer that will adhere to slippery things like tile. - - - - - No paint, including Zinsser Bullseye 1-2-3, will stick to regular silicone caulk. You can try one of four things, all of which involve removing the old silicone. First, silicone comes in several colors. If the paint color you're using is close to a silicone color, recaulk with colored silicone. There's also clear silicone. That blends in very well and it's hard to see. And also paintable silicone, which is just what it sounds like. My recommendation is to quit using silicone and change to polyurethane caulk, such as Sikaflex. It lasts better than silicone does, and you can paint it with latex or oil-based paint.
Silicone works better.
Maru-brand lubricant and 50k wt silicone diff. oil both work well with Rubik's Cubes. See related links.
silicone spray did well for me. but i don't know what the long term effect on my keyboard will be. this is a desktop keyboard. laptop keyboard is a very different thing. silicone spray does protect rubber, etc as well as lubricate and is not conductive of electricity. so far, its worked very well.
I recommend that you caulk around the edges with transparent silicone caulking compound.
Since this Behr's premium transparent weatherproofing sealer is silicone fortified, you should wait at least six months prior to recoating with a 100% acrylic latex paint.
Put the "O" ring on the line and lubricate it with a little silicone.
you should either use a dry lubricant like graphite or a 100% silicone. anything else will make the plastic deteriorate.
Hair is dead. Dead things cannot be rejuvenated. You can lubricate the hair with various substances such as silicone oils and make it appear shiny. If you want to call the improved texture rejuvenation, go ahead.
silicone gel is added to green gas, it helps lubricate the gun and some say it lowers the pressure of the gas and can cause less damage to the gun.
Most of the time it's caused by the window binding in the window channels, causing the motor to draw too much juice. Lubricate the window channels with spray silicone
A light coating of silicone lubricant, available as a spray, on the bulb threads, will lubricate the bulb and socket, and be electrically safe, and will make future removal much easier. Only a LIGHT coating, or short spurt of silicone, wiped over the bulb base, should be used.
If the laminating machine is based on heat, then the tracing paper will burn and deform heavily. Maybe you could try to do it manually using some adhesive and glue it to a transparent material (silicone, nylon, glass)
The vent is held in by a rubber grommet. Lubricate the grommet and valve with some spray silicone. Wiggle the valve around to disperse the lubricant then pull the valve straight out as you wiggle it.