take out the old motor and drop in a h22a1 from a Honda prelude 200hp all motor
make it lighter it'll be faster if it wieghs less
get a turbo kit on it and an intercooler
is it EFI or carb if its efi u have room to change motors like the other guy said but if u like me u probably have the carb version and a motor swap would be way out of budget i agree with puttin a turbo on it but i mught want to try and do a lil bit of work with the cam gears and cylinders to make sure tey can take the psi i recomend no higher then 15 if its carb 17 psi if its efi good luck tuning :)
No, Honda does not make an Accord convertible.
Purchase an AEM cool air intake
At the engime end of the upper rad hose. Make sure the spring goes toward the engine.
Never heard of a Handa Accord. A 1992 Honda Accord is Front Wheel Drive. Honda does not make a 4wd Accord.
Honda Motor Company. The American sold Accord is built in Marysville, Ohio.
Not likely as these are two different generation Accords but not positive. Call your local salvage yard or Honda dealer to make 100% sure.
Depends on what you are trying to accomplish.
No, only 4 cylinders and a V6.
Favor de Google Honda Accord 1992 e visitar OS sitios, especialmente o seguinte: http://autos.msn.com/research/vip/Reliability.aspx?year=1992&make=Honda&model=Accord.
To install a stereo in a 1985 Honda Accord, make wire to wire connections using either a solder iron and electrical tape.
May be you have a misfire?
Certainly. Tuning a car has long been a hobby of many. However it is better to know the engineering first, otherwise irreparable damage can ensue
( Yes ) , the 2.2 liter - 4 cylinder engine in a 1993 Honda Accord ( IS an interference engine ) according to Gates ( they make timing belts etc . )
Put a turbo on it!
Yes ( according to Gates - they make timing belts etc , the 3.0 L - V6 is an interference engine in your 2003 Honda Accord )
strap it to a rocket!
Fit, maybe, but run correctly no. The 1993 is OBD1 & the 1996 is OBD2. Look for a 1996 engine and make sure you get a VTEC if that is what the 1996 is equipped with.
The recommended tire pressure for the 1997 Honda Accord is 32 PSI. Drivers are encouraged to make sure their tires are adequately inflated to reduce fuel consumption.
Remove the muffler
To do a valve lash on a 2003 Honda Accord make sure a lash gauge is on hand. Valves lashes adjust the valve to piston clearance on cars. Be sure to use the appropriate specifications of clearance for the 2003 Accord.
CB7 is the chassis code found within the vin number on 1990-1993 Honda accord models, and used as lingo in the import tuning scene to refer to this particular make and model of that year.