Mounting a European license plate requires special items. A front end Euro front mounting plate needs to be acquired, as well as the brackets that go with it.
yes, i own a 1997 Camry xle and it has a front license plate mount.
You need to purchase a license plate mount. Once that's attached, the plate can be affixed to the mount.
Tampa Bay Buccaneers
Buy a bracket at auto parts
By the oil filter behind the motor mount.
Driver abuse.
You can peel one off of a car in a local salvage yard. Shouldn't cost you more than $15. Dealers will also carry these kinds of things, but they could be more like $25.AlternativeYou may also be able to follow the steps in the following link to mount the license plate holder without drilling holes into the grill of your vehicle. http://volkswagenforum.com/forum/showthread.php?t=12101
Using a sharpie marker, hold the license plate up the the front bumper and mark the bolt holes on the bumper and then using a drill gently apply pressure and drill through the bumper, be sure there are no wires behind where you are drilling and not to drill in too far, then attach the license plate with two bolts and nuts.
You only need one license plate on your car in the state of Idaho. There is only one place to put a license plate on a car, and one required.
3/8 by 3inch grade 8
Yes, you can. However you need to make sure that where you mount it will be the most effective. Mounting it on the dash or low on the windshield will be the best choice, since most police officers aim their radar at the front license plate or headlights.
It is on the front of the engine, behind the engine mount bracket.It is on the front of the engine, behind the engine mount bracket.