You have to remove the bolts inside the wheel well, remove the fender that is inside of the wheel well, and then you will have access to the bulb.
They don't make it easy :p
Do not take the inner fender well out. These lights pop out, although like most German made VW stuff, it can be difficult. There is a spring loaded end on these lenses. Push on them and you will find the end that pushes in. The end that pushes in allows the other end to pop out, in theory. The end that pops out has two small prongs that like to break, causing the owner to have buy new ones. Surprise surprise. Use a very small flat blade screw driver and push in on the spring loaded end, then on the opposite end, pry the end back and out. The end that pushes in allows the other side to slide back and out. Putting them back in is worse and if they break, you will have to buy new ones. The bulb holder pulls straight out. Don't twist on on and the bulb is a 194
how do change the front marker lights on my 08 kia spectra can't get at them from under the hood
The 1995 Pontiac Grand Am has reflectors on the sides that may look like side marker lights, but they are only reflectors. The tail lights and front parking lights are so positioned that they can be viewed from the sides, so separate side marker lights are unnecessary.
Front marker lights can be changed by removing front headlight assembly. To remove pull up on two metal clips behind light assembly and unplug wires. The side marker lights are now accessable. Turn bulb socket ccw to remove.
Illegal color of side marker lights. If present, must be yellow in the front and red in the rear (25106, 24003 VC).
I have same problem have you figured it out yet?
how two change my front head lights on a peugeot 206
In the front, you have to reach the lights from under the hood, pull out the assembly it's in and change the bulb. In the back, you can remove the panels from inside the trunk and do the same thing. The back is much easier than the front.
its a big hassle, u have to change alot. grill, hood, lights, light brackets, radiator support, core supports.....just do what im doing an put a mkIII golf front end on. hood, grill, lights and voila! I dout very much that it will work since both bodys are diffrent
what tools u need to change a wheel bearing on a vw jetta 2003 jetta diesel
Yes you can. The only difference will be that the orange marker lights in the front will not fit.
how do u change front signal lights for corvette 1999
faulty hdlmp switch