I have the same problem with my 1998 GMC Jimmy. I have been using a needle-nose pliers to grab the cable. Sucks! Must be a common problem. Anybody know how to repair this problem? Can I order just the end of the cable with the pull knob or do I have to order the entire cable? Any help would be appreciated! Thank you.
If the cable is broken at the handle, you can have someone push down on the hood so you can grab the end of the cable with vice grips. That will get the hood open.You will need to remove the grill from your 2000 GMC Jimmy. With the grill removed. You can remove the hood latch retaining bolts. The hood will be released with the latch bolts removed.
cable broke release latch for the hood can't open it
how do you open the hood on a 1992 buick regal if the cable is broke
IS JUST THE HANDLE OF THE CABLE BROKE OFF UNDER THE DASH? IF SO USE A PAIR OF PLIARS TO PULL THE CABLE TO POP THE HOOD.
take a long thin screwdriver and stick it into the "hole" where the cable goes into the latch. Pry from right to left, this will pop the hood. I just had it happen to my 2000 Dakota.
How much cable came out when broke? Cut the plastic cable back to the point where you can see the steel cable core and pull with vice grips to open. You can pull the cable around to handle easier.If it broke under the hood try to find the cable and do the same.
Try to find the cable that the hood release would normally pull, you might have to remove some panels. Try pulling that with a vice grips.
if your latch just broke, use a vice grip. if the cable itself has snapped, it gets tricker. my 2nd cutlass's cable snapped. i had to lift and jerk the hood manually until it came loose.
Ecklers has the replacement cable and "Installation instructions" which show how to get the hood open so you can relace the cable. Tried to attach the diagram, but no attachment tool here.
the cable is either stretched or broke
the 71 cutlass has no cable pull on latch in the middle of grill or just below frt. bumper
if the cable broke at the handle inside the car there will be a black cable with steel cable inside cut the black cable back so you see the steel cable get a par of visegrip pliers and pole the steel cable til the hood opens.