Want this question answered?
To program a remote keyless entry on 1996 Chevrolet pickup, first hold down the power unlock button of the door panel. Second, turn ignition key ON, OFF, ON, OFF. Then release power unlock button on the door panel.
Try: http://www.programyourremote.com/ It has instructions for 1997-2000 models, perhaps they'll work with the 1996 model. Good luck!
keyless systems don't require you to put the key in the ignition, you can leave it in your pocket and hit the start button
You have to go to the dealership to have your keyless remote reprogrammed. They have a scan tool to tell the computer that you are using a new key fob. I just did it to my 1997 sebring. I knew the service manager, so he let me borrow it, it took me about 15 minutes, most will do it for a small fee, some will do it as a courtesy.
The dealers scan tool is required.
Sadly this is gonna require a visit to the dealer. Plan on spending $40 or so to get this done. Every Jeep from 1996 or so onward will need a dealer program to get keyless working.
Pass. side rear, behind shoulder strap of seatbelt
Go to this website http://www.carandtruckremotes.com/ and you can buy an original factory remote at a better price than dealership.
To resynchronize the remote press and hold both the lock and unlock buttons for about 8-10 seconds. If you do it right, the horn will chirp and the lights will flash once. You have to be in range of the car.
These models (1996 and 1997 I know about) do not have keyless entries when they come of the production line. If one does, it is dealer installed. The box can be found under the instrument panel, somewhere behind the parking brake pedal.
That sounds like your keyless remote sensor.
bring it to a dealer or a shop that puts them in you need a special computer and codes