look for a tensioner pulley, if you don't know what it looks like. then go to the nearest auto motive store and buy the book on your car. there should be a diagram on how the belt goes around the other pulleys if it is just one big belt, if not then look on the alternator bracket there should be around three bolts that need to be loosened. be sure the belt is tight before you tighten the bolts,put some pressure on the altenator. Hope the info helps...
Open the hood, drivers side, the serpentine belt drives it, it has copper colored wires showing.
Yes, the V6 Saturn uses a timing belt, and it should be changed every 100,000 miles.
The V6 Saturn used a timing belt. The 4 cylinder's used a timing chain.
u have to remove the air filter box and the engine mount to replace the belt....
how do you route the alternator and ac belt on a 2001 Mitsubishi eclipse
it is the belt by the alternator belt
You will need to bolt the alternator into your 2001 VW Jetta engine. Connect the wiring harness to the back of the alternator. Put the serpentine belt on to the alternator. Tighten the belt.
how do you tighten fan belt on l200
Serpentine belt? You may have to remove to tighten alternator
the alternator is run off of your s belt, it doesnt have its own specific belt
Follow the route of the serpentine belt. It drives the alternator.
The alternator is belt driven off the front of the engine.
The alternator on a 2001 Nissan Sentra is replaced by loosening the serpentine belt tension, loosening the alternator bolts, and slipping the belt off the pulley. The alternator can then be unbolted, the wiring harness disconnected, and a new alternator put in place.
Weak alternator? Bad Voltage regulator? Alternator belt slipping?
Two reasons why your alternator belt is breaking is: Your alternator belt is too tight, or you are using a belt that is old and worn. I cannot answer your question fully without seeing the vehicle. Sorry.
how to replace an alternator belt on 2001 hyundai accent
Begin by removing the alternator belt from your 2001 Chevy Express alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Remove the belt from your 2001 Suzuki alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
You'll probably want a manual for this, but you may be able to locate a bracket on or near the alternator that moves the alternator itself or a pulley that the belt runs on. This is a tensioner and turning the bolt one way or the other will tighten or loosen the belt. DO NOT OVER-TIGHTEN THE BELT! This will damage the components the belt runs on.
below the alternator. there is a diagram on the engine above the serpentine belt
Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.
Disconnect the battery. Take the alternator belt off. Disconnect the wiring and unbolt the alternator. Reverse the process to reinstall.
alternator drive belt?
Yes, I know of no engine where the alternator is driven by the cam belt. The alternator is driven by a drive belt or serpentine belt.
There isn't a timing belt on this vehicle, it only has a serpentine belt for alternator, power steering, ect.