Take it to Jiffy Lube and have the attendent show you how to read it. You will be able to ask as many questions as you would like to and get as much information as you need. You will have hands on training and visuals.
There isn't one
The oil dipstick is built into the oil filler cap. Unscrew the cap, pull the dipstick out, wipe it dry and reinsert it. Remove it again to read the oil level.
To read the oil dipstick in the 1997 Ford F150, remove the dipstick from the oil reservoir. Wipe the dipstick clean and then place it back into the reservoir. Then, remove the dipstick again and look for the height of the oil on the stick. It should be in the "Full" range.
The dipstick on a Harley-Davidson Sportster motorcycle is read by noting the position of the oil in relation to the markings. The oil should be between the full and add marks.
Transmission fluid goes down the dipstick tube. The transmission dipstick not the oil dipstick. use a skinny funnel. do not over fill.
6quarter
The 2003 Impala uses between 4.5 and 4.75 quarts of oil during an oil change. Use the dipstick after getting the oil level close to add more as needed to fill.
I was told that the oil is electronically read. no dipstick.
poop
If it's similar to earlier models, the oil dipstick is built into the oil filler cap. Unscrew the cap, pull the dipstick out, wipe it dry and reinsert it. Remove it again to read the oil level.
Open the bonnet. Get a dipstick and clean it well. Insert the dipstick entirely into the oil tank. Remove it carefully and read the oil level.
you have to look for the line near the bottom of the dipstick and if the oil is up to the line that means it is full enough.