0
How do you release tension on the parking brake shoes in order to remove the rotor 2005 ford explorer.?
Dkausa
I dont think you will have to release the park brake cable... simply unbolt the caliper and the caliper bracket if neccesary, and leave the cable attached
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you adjust parking brake on Ford Taurus?
# 1 Release the parking brake pedal to make sure it is disengaged. Put your Ford Taurus in "N" for neutral. # Step2 Raise your Ford Taurus rear wheels in the air using your jack and support the rear wheels with the jack stands. # Step3 Get underneath the vehicle and locate the parking brake cables. There is a cable coming from each rear wheel and meet in the middle with an adjuster nut. # Step4 Use the cable tension gauge 021-00018 or another tension gauge to measure the parking brake adjuster nut against the rear parking brake cable adjuster. Follow your tension gauge instructions to measure 18 to 26 pounds of tension for your 1996 year Ford Taurus and 34 to 46 pounds of tension for your years 1997 to 1998 Ford Taurus. # Step5 Press in on the parking brake foot pedal to the ground and then release the parking brake pedal. # Step6 Verify the rear wheels spin freely when the parking brake pedal is fully released. # Step7 Lower your Ford Taurus using the jack and remove the jack stands from the rear wheels.
What do you need to loosen to change the serpentine belt on a 4 cylinder 1998 jeep wrangler?
u need to relaese tension on the tension pulley. this is usually done with a long socket wrench handle. when u release tension and remove belt you then release tension on pulley until you have routed new belt . you then move tension pulley again until you can put belt on it, then release pulley and it will automatically provide correct tension
How do you remove alternator in a 1981 300D Mercedes?
The alternator is on the bottom-right of the engine. Jack up the right side of the car (chalk your wheels, ensure the transmission is in park, and the parking brake is set). Loosen the locknut on the alternator. Back off the tension on the belt with the tension bolt. Remove the belt and all wires attached to the unit. Remove the alternator bolt and unit.
How do I replace the serpentine belt on a 2004 Matrix?
First you need a breaker bar and 19mm socket to fit the "tension bolt". Turn tension bolt clockwise to release tension in order to remove the serpentine belt.
How do yoo adjust the Parking brake on a Lexus is 300?
Remove the cover of the parking break handle. On the back (opposite the button you push to release) there is a little nut to tighten and loosen.
How do you remove the spare tire on 2003 ford explorer?
how to remove the spare on a 2003 explorer
How do you adjust 2001 KIA RIO parking brake?
To adjust the parking brake, first open the middle console and remove the small plastic square. Under the square is a bolt that you must loosen. Once this is loosened, take the console cover off. On the driver's side of the parking brake, there is a nut that you can loosen or tighten to adjust the tension of the brake.
Who to avoid tension others are becomes tension?
Those who have love and affection remove others tension .
How do you loosen the belt tension-er on a 2006 Chevy trailblazer?
put a wrench on it as to tighten the bolt. That will release the tension. You can also push down on it but that will require a second person to remove the serpentine belt.
How do you replace the water pump on a 1993 Ford Explorer?
To replace the water pump on a 1993 Ford Explorer, disconnect the battery and loosen the belt tension pulley. Remove the belt on the water pump. Disconnect the radiator hose from the pump and remove the bolts holding the pump. Remove the old pump and gasket. Clean the surface of the water pump mount with a gasket cleaner. Insert gasket sealer, new gasket, and pump. Reconnect radiator hose, belt, and tighten tension pulley. Reconnect the battery. Refill radiator with antifreeze.
How do you replace the rear rotors on a 1997 Explorer?
Remove the rear wheels, then the calipers and simply pull the rotors off. If the parking brakd is on the caliper you need a special tool ot retract the caliper.
What is a belt tension pulley?
Most cars now have a serpentine belt that drive the alternator, water pump, power steering unit, etc. The belt tension pulley is a spring loaded pulley that keeps the proper tension on all these units. It can be moved to release the tension in order to remove the belt.
