Follow the link below, labeled "How to replace a Lexus IS300 tail light"
You can access the Nissan taillights from the cargo compartment. Remove the tail light assembly cover. Remove the tail light wiring harness. Remove the tail light assembly retaining bolts.
You must remove the plastic "buttons" holding the trunk lining (flathead screw driver). Remove enough to get lining out of the way to have access to the back of the tail light assembly.
You will need to remove the tail light covers in the cargo compartment. Remove the wiring harness. Remove the tail light assembly retaining bolts.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light in side the trunk there are is gonna be carpwenting covering the metal part of the body you will see plastic screws remove that then remove the tail gate it self and your be able to remove the tail light
Inside trunk, remove thumb screw to fold back paneling near tail lights. Then remove three thumbscrews and the whole tail light assembly can be moved out to change light bulbs.
Open trunk, there should be a few screws that hold tail light assembly to car. Remove screws and pull tail light assemble straight back.
open the hatch there are two screws remove them and the tail light will come out, after that there are three more screws remove them and you can get to the bulbs to replace them
No there have been three body changes between those two years.
You can access the tail light assembly from the cargo compartment. Remove the tail light wiring connector. Push in and turn the lightbulb, at the same time, to remove it. Reverse the process to install your new tail lightbulb.
to remove tail light's. open the tail gate. remove the 2 10mm bolts with out washers on each side..then you must pull the light straight back....it will be tight but their are no more bolts holding it, only plastic tabs..