Want this question answered?
Remove the screws in the door panel.
pop it off
== ==
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Remove the Phillips head screws out of the panel first, then remove the clip behind the window handle, if it's manual windows. The next step is to carefully pull the panel off of the plastic clips, which should remain fastened to the panel. You may have to pry between the panel and the door to get it started. Once the panel is off at the bottom lift it up and out from between the glass and door frame.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
i think you should remove the door first then remove the door panel by hitting it with a soft hammer to release it.
You have to pull the door panel off - it is a pretty easy job to replace the regulator and you can buy them cheap online
Removing a 1991 Chevrolet Silverado door panel is pretty simple. All you will need to do is to remove the screws holding the door panel in place.
Chevy Tahoe remove front and rear speaker
Using a screwdriver remove the screws and all of the clips in the door panel, and pull the panel away from the frame gently. Remove any wiring connectors, and pull the panel off the door frame.