How do you remove a door panel from a Chevy Colorado?
Remove the Phillips head screws out of the panel first, then remove the clip behind the window handle, if it's manual windows. The next step is to carefully pull the panel off of the plastic clips, which should remain fastened to the panel. You may have to pry between the panel and the door to get it started. Once the panel is off at the bottom lift it up and out from between the glass and door frame.
pop out small panel behind door pull remove two torx screws , remove two pop out connectors on outer edge of door panel near door latch ,grab bottom of door panel and pull it towards you this will release panel ,disconnect wires as needed if you want to remove entire panel from door, lift up on panel to remove it from edge of window track
General Chevy info, remove door hande bezel, remove armrest, remove window crank if it has manual windows.(there is a clip on the crank) Start at the bottom and gently pry panel up pulling plasic clips out of holes in door. When panel is loose it will lift off of window ledge. If you have power windows or locks you will have to unplug the switches carefully
To remove the door panel. Just simply take something like a screwdriver and put in between the door and the panel. The panel is held on with little plastic like snaps.. That will get the panel off.. and if you was to brake one.. any part store carries the little plastic things for like a dollar or two for about 20 of them.
To remove the rear door panel in your Chevy HHR, you will need to remove the two screws located inside of the door pull cup, and there's also one in the middle of the inside door handle. On the outer edge of the door there's also a pin the holds the panel in place, you will need to remove that. Then use a door panel removal tool to pry the door panel off of the…