Want this question answered?
how to install a blower motor for a 1994 Toyota pickup
how to install a blower motor for a 1994 Toyota pickup
It is on the lower passenger side under the dash/glovebox. Remove the cover over the blower, remove 4 bolts and blower will drop out.
in the fuse box
disconnect the electrical connector from the blower motor and remove the 3 screws from the blower motor housing.pull the blower motor and fan straight down. to remove fan from blower motor,squeeze spring clip togetherand slip fan off the shaft.some models have no clip or screw holding fanto shaft, in this case use 2 screwdrivers to pry it off.install fan onto blower motor housing and install blower motor into the heater housing.
How do you replace the blower motor on a 1994 chevy lumina euro?
it on the blower motor housing
Remove and test with an ohmmeter Explain how to test with an ohmmeter?
the blower fan motor is located under the passenger side dash, just remove the panel and then unbolt everything in your way until you come to a sort of triangular shaped blower motor.
You either have a blown fuse, defective blower motor, defective blower motor switch, or a defective blower motor resistor pack.
Check to see if you have 12 volts at the blower motor. If yes then the blower motor is bad. If no, then the resistor, relay, or fuse is bad.
Could be, a blown fuse, a bad blower motor, a burned out blower motor speed resistor, a bad blower motor switch,