Take out number one spark plug (or all to make it easier to turn) fit a socket to crank pulley bolt and turn the crank until it's just after TDC say thirty degrees. Feed about 900mm of 10mm rope into number one cylinder but don't drop it all the way in. Turn the crank back until you get a firm resistance and apply a breaker bar to the socket. Apply pressure to the breaker bar until the bolt undoes. You will probably need to remove the radiator and fan assembly to be able to get to the crank pulley unless you have already done so.
The bolt is normal thread, righty tightly, lefty loosely.Using a cordless Impact gun is the easiest way to remove it without having to hold the pulley from turning. It should be a 15/16 or whichever size is equivalent in metric measurements.
on the right side of the engine
hoew do you remove a c v axle from a 97 isuzu rodeo front right
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
how do you remove transmission in 1999 rodeo
No
How to remove the starter from a 1997 Isuzu Rodeo 4X4 automatic
remove the six lug nuts
step 1. remove your oil pan step 2. look up step 3. notice the metal shaft running from side to side? step 4. realize that's your crankshaft
The oil in a 1993 Isuzu Rodeo is put into the reservoir that is located on top of the valve cover. There is a cap that has to be rotated to remove it.
no
Take it to a mechanic!