Want this question answered?
no.
Buy a new CV Axle Halfshaft and a new axle nut comes with it.
how to remove rear axle from 1988 f250 ford
Th easiest way to change the rotors on a 1990 Ford Festiva is to pay someone. However, remove the tire, remove caliper, remove the hub nut and washer. Remove the rotor from the CV axle. There four bolts on the back side of the rotor, but you may have to press out the rotor bearing. To re-install read backwards
plug is on the left front of axle housing. take a 3/8 drive to remove
It is best to replace the whole axle, Its easy to do not to mention pretty inexpensive....
You don't. If the axle beam is bent you replace it, if the frame is bent you sell it CHEAP and FAST.
front or rear rotor? jack up wheel that needs rotor removed. remove wheel remove brake pads and caliper for back axle, remove axle nut. u will need special socket to remove this nut slide rotor off axle, making sure u dont drop bearings on the ground to remove front rotor on4x4, it is pretty much the same as rear , except you will have to remove locking hub from axle before you can remove axle nut.
Yes , the transmission on a front wheel drive car is called the trans axle
yes
On a 4-wheel drive it is free floating and on a 2-wheel drive you have to remove the axle nut and bearings. From what I have heard in the ford forums is the 4-wheel drive free floating can be hard to remove if they get rusted in place so be sure to have a rubber mallot on hand. I just replaced my front rotors on my 2-wheel drive and it was real easy to get off.
89