pull on the edge of the horn button to remove it - then unscrew the 3 Phillips head screws that hold the inner horn assembly to the wheel ( do yourself a favor and unplug the horn under the hood before doing this or every peice of metal you touch makes the horn sound) - then remove the large nut in the middle of the steering wheel - next get a wheel puller and 2 bolts that thread into the 2 larger holes beside the steering shaft - a couple turns on the wheel puller and it comes right off
Pop the horn button off. Under that is the larger nut that holds the wheel in place. Afte that is removed, use a steering wheel puller to remove the wheel.
Yes.
you must remove the steering wheel and turn signal from column. then you can acces the screw to remove the switch.
The steering column is the part the steering wheel sits on.
Look at the other question about the 95 yj, it's explained there... lataaaaaaaaa
driver side on left side of dash/steering wheel - remove panel on side
Press a button with an icon of a steering wheel with heat waves rising from it. Google "jeep heated steering wheel button" for a photo of same.
Remove steering wheel, turn signal (4 screws), and torx holding ignition, reverse to reinstall.
You must remove the steering wheel. There are some special tool that make this much easier.
you have to remove the steering wheel and the turn signal. this requires special tools that can be purchased or rented cheaply.
Center of the steering wheel.
On the steering wheel