Oh yeah dude, easy. Remove the frame rails on the bottom of the car right under the starter (below the throttle body) then take off passenger side wheel, remove that from the transaxel (some working space) then remove the engine mount that is in your way. Just rip out the starter, take it to a parts shop, get a new starter and your core back =) and stick the new one in! Hope that heps!
Remove the positive cable from your 1995 Nissan Pathfinder battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
starter is located on drivers side below intake manifod very hard to see it, easier to see from underneath it attaches with one bolt from bell hsg. side and lne from starter side.
Remove the positive battery cable from your 2001 Nissan battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.
You will need to remove the tire and wheel from your 1992 Nissan Stanza. Remove the brake pad spring and caliper. The brake assembly will come off. Reverse the process to install the new brake pads.
Drain the water from your 1987 Nissan Stanza. Remove the water return hose from the water pump. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
Remove the negative battery cable then follow the posative cable and find the starter. remove the wires and mounting bolts and work the starter out. Sometimes the bolts are hard to get to.
Disconnect the battery. With the care safely raised, remove the two bolts holding the starter on. Disconnect the wires. Reverse the procedure to install the new starter.
must remove oil filter to get starter out have fun
Remove the cables from the starter. Remove the starter retaining bolts. The starter will come off. Reverse the process to install the new starter.
First remove the tailights then the trim piece on the rear body pannel(where the stanza emblem is) then you will see the bolts for the bumper hope this helps.
To install a 2000 Yamaha Waverunner XL 1200 starter, first remove the 2 bolts. Then the wires connected to the starter. Remove the starter and replace with new.
Remove the starter cables. Remove the retaining bolts. The starter will come off. Reverse the process to install the new starter.