Yes, you can buy at local auto parts store kit. It is simply a short thin cable with a handle on each end, you able to remove the handle and push cable under rubber seal, then re attach handle. With another person, it is a simple pull the cable back and forth around seal of windshield until free to lift out.
Remove the belt from your Mercury alternator. Remove the wiring harness from the alternator. Remove the retaining bolts. Reverse the process to install your new alternator.
Begin by removing the retaining ring at the top of your 1996 Mercury Tracer ignition switch. The ignition lock cylinder will slide out. Remove the wiring harness from the end of the cylinder. Reverse the process to install your new ignition lock cylinder.
Purchase a Hanes Auto Repair manual for the 1999 Mercury Tracer
Mercury Tracer was created in 1987.
3 screws facing the engine
To access a tie rod the Tracer needs to be safely raised and supported. Remove the wheels and lower ball joint. Mark and remove the outer tie rod. Install the new tie rod to the proper marking. Reinstall everything and take the car to receive an alignment.
Located in the fuel tank - may have to remove for access
need timing marks for 97 mercury tracer
the brake light switch is just above the brake pedal. I just bought one for my own 97 tracer yesturday and need to install it.
Need to know where is the thermostat located on a 1996 mercury tracer.
Need to know where is the thermostat located on a 1996 Mercury tracer.
Is a 1996 mercury tracer 1.9 a interference engine?