Next, using a very small screwdriver (preferably a Phillips head) insert it into the hole located under the ignition key cylinder on the steering column.
Pressing upwards with the small screwdriver or nail, you will press in the release button.
Firmly grip the key & ignition cylinder while pressing up on this release button & remove while in the "On" position.
Insert your new ignition cylinder with the key in it, into the "On" position until it snaps in place. Going in, the release button does not need to be depressed.
You now have a Cylinder key, that will not match your door lock keys!
Best of luck.
How do remove and replace the ignition switch of a 1983 Oldsmobile Regency?
remove ignition switch 92es300
Remove the ignition switch retaining ring. Pull the ignition switch out. Remove the wiring harness from the back of the ignition switch. Reverse the process to install the new ignition switch.
First remove the steering wheel, remove the torx screws and remove the house, remove the signal switch and the wiper switch, remove the torx screws and?æremove the ignition switch. Put in the new switch and replace everything in reverse.?æ
no the switch can be independly remove from the back side of the ignition lock
You will need to remove the retaining ring at the top of your 1978 Chevrolet Blazer ignition switch. Slide the ignition barrel out and remove the wiring harness. Reverse the process to install the new ignition switch.
Remove the airbag and steering wheel, remove the torx screws from the steering housing and remove the housing, remove the screws from the signal and wiper switch, and remove the screws above the ignition switch and remove the switch. Replace the switch and replace everything in reverse.Ê
Remove the retaining ring from the top of the ignition switch. Pull the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
Remove the retaining ring at the top of your 1994 Chevy Corsica ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
The 1992 Plymouth Cold ignition switch is held in place by a retaining ring. Remove the retaining ring at the top of the ignition switch. Pull the ignition switch out. Remove the wiring harness from the ignition switch. Reverse the process to install the new ignition switch.
You will need to remove the retaining ring at the top of your 1995 Dodge Grand Caravan ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.