Serpentine belt diagran 2003 mazda 6
Remove the power steering belt first then the alternator belt will go on.
The Mazda 6, First and Second Gen, have a timing chain.
All 2002-2008 Mazda 6 petrol engines are chain driven, only diesels have timing belt.
There is an adjusting bolt on the bottom of the PSP, loss it and push the PSP down, the remove the belt.............. it will be easy
the belt is simple to change you actually have two one is the powersteering belt and the other is ac belt. you need to first lower the top pulley closest to the front of the engine remove the belt of the three pulleys then lower the alternator using the tension screw and remove the pulley to install just follow in reverse
The 3.0 litre Tribute has timing chain . If you remove the oil filler cap you can see the chain on the left of the opening
To change the alternator belt on a Mazda 323, first remove the right hand air shield under the can. Then locate the pulley tensioner of the AC and loosen the bolts on the pulley. Finally, remove the alternator pivot bolt under the alternator to remove the old alternator belt and replace with a new one.
Disconnect the battery Remove the engine covers to access the alternator drive belts. Remove the electrical connections from the alternator. Slacken the bolts, remove the belt. Remove bolts, put new alternator on, tighten bolts until you can just move alternator, fit new belt, move alternator so the belt is tight and then tighten bolts to their specified torque.
626
remove door panel, remove speeker.
follow the belt, it's always on the belt, as is the water pump, air compressor, power steering.