what year?front or back?
for the most part , all you do is remove wheel, remove caliper,then pull brake disk off
if disk is a rear disk, the park brake is inside the disk and you will need to use a hammer to tap on disk to remove it. once the wheels are off there are only a couple of clips on some of the wheek studs to keep disk in place. the disk is actually held to vehicle with the wheel and lug nuts
How do you remove the rear brake rotor on a 2005 Dodge Ram 2500?
you have to remove the caliper to access the brake pads
should just pull off if parking brake not engaged
How do you stop brake pulsation on 1998 dodge ram
Yes a 1987 dodge ram has an e-brake cable
With a big hammer. hit it on the edge
You may have to loosen the parking brake shoe adjuster.
You have to remove the brake caliper before you can remove the brake pads. I recommend you use a piece of wire and tie the caliper up to the spring to hold it. Now that the rotor is out of the way, you can remove them by sliding them out.
If the parking brake pedal on your 2001 Dodge Ram 1500 is stuck to the floor, you might have broken the parking brake cable. Remove the rear tires to see if the cable is still attached and replace it as needed.
A 2001 Ram uses DOT 3 brake fluid.
3/8 inch Allen
Vacuum