Your local auto parts store can sell a simple tool for aprox $5 that does just that.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
How do I take off the handle to put a new one on a chevy colorado 2005
There is a spring clip on the back of the handle that you have to get off before the handle will pull off, go to the parts store and get the special window crank removal tool to get it off.
Your local auto parts store will sell you an inexpensive tool for under $10 to remove the clip from behind the handle to release handle from door.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
There is a spring clip located behind the handle that must be removed then the handle will slide off. You can purchase a tool for the job from most parts stores for very little money.
Use a small screw driver to pry the tiny pin that holds it in place with the shaft. The pin looks like a paperclip and is wraped around the cylinder of the handle.
just pops off after removing the window handle, if manual, and some screws for the armrest and maybe the door trim side of window.
A simple inexpensive tool is available at your local auto parts store. There is a C clip behind the handle that needs to be removed to release the handle.
You have to pull the door panel off - it is a pretty easy job to replace the regulator and you can buy them cheap online
Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.